Motorcycle Battery Charger

POWEROAD PLFC-12-2 is a motorcycle battery charger based on microprocessor for all types of rechargeable 12V lead-acid batteries, covering all types of AGM “MF” valve regulated (VRLA), GEL-electrolyte types and 12V Lithium-ion phosphate (LiFePO4) batteries. For wholesale only.

Description

POWEROAD PLFC-12-2 has two modes which is compatible with lead acid battery and LiFePO4 battery, it can charge POWEROAD lithium motorcycle starting battery, and turns into a lead acid motorcycle battery charger by shifting the mode through the switch.

Key Features

– This 12V battery charger is applicable for both lithium batteries and lead-acid batteries.

– Has multiple protection for a longer lifespan of batteries including:

● Polarity reverse protection

● Short circuit protection

● Over temperature protection

● Over current protection

● Over voltage protection

– Safe for long-term connection with batteries thanks to automatic cut-off setting.

– Safe spark free operation.

– Able to check and indicate weak or damaged battery.

– Easy to learn status from clear LED display.

Product Highlights

It is suitable for lead-acid batteries from 5Ah to 32Ah, and for lithium-ion batteries from 3.2Ah to 20Ah, so you do not need to purchase a specific 12V LiFePO4 battery charger. It has intelligent detection and protection to guarantee safety and prolong the serve life of batteries with various protection manners.

Specifications

Items

Parameters

Input voltage

100~240 AC, 50/60Hz

Input current

Max. 0.5A

Output voltage

14.6V

Output current

Max. 2.0A

Lead-acid battery range

5Ah~32Ah/12V

Lithium-ion battery range

2.3Ah~20Ah/12V

LED indicator

Power On/Green

Power supply indicator

Charging/Red

Blink: In pre-charge state (in lithium mode)

Light: Battery being charged indicator

OK/Green

Light: Battery being charged indicator

Blink: Bad battery

Warranty

1 year

IP Grade

IP65

FAQ

Q: Can I charge the LiFePO4 battery with an SLA (sealed lead acid) battery charger?

A:We suggest you use the matched charger that contains a lithium charge mode for your LiFePO4 battery, and you must NOT use a lead-acid charger if it has an automatic “desulfation mode”, which cannot be permanently turned off. POWEROAD motorcycle battery charger is a good choice. 12V LiFePO4 battery charging is in a constant-current and constant-voltage way. Lithium battery is sensitive to overcharge, so the protection circuit is needed. While the ideal charging current of lead-acid battery is pulse type, with pulsating DC charging with direct rectification and no filtering of the mains 50-60Hz power supply we use (this is the practice established when the circuit is simple and the cost is low), which would cause damage to lithium battery.

You May Also Like

Send Inquiry

=